Rapier 50 HD SPECIFICATION
High Definition ANPR cameras with high output IR illumination in a compact IP68 enclosure
Specification
Recognition Range and Field of View
Typically 5 to 50 metres depending on choice of lens (8, 12, 16, 25, 35mm)
Field of view typically 6m (2 lanes of traffic) at high speed with very high accuracy
Illumination (built in)
4 high power pulsed LED arrays (White Light, 740nm, 850nm or 940nm) with lens beam pattern options
Illumination (external)
Trigger I/O available with MAV Snap Mode and Triggered sequences available
Image
1/1.8” sensor with 1280(H) x 1024(V) effective picture elements providing raw 1.3 Megapixel images
Image manipulation
Camera based Area of Interest (AoI) facilities and scaling possible via SDK or control application
Frame rate
Up to 50 images per second (ips). Snap mode also allows triggered single or sequential capture
Exposure Time / Equivalent Shutter (based on 50 ips)
Global exposure time 50μs - 20ms / Equivalent shutter speed 1/20,000th to 1/50th second
Illumination period/power
Illumination pulse width, offset and power variable under software control including tracking of exposure
Cabling
Maximum cable length 100m without GigE network relay
Camera Control Protocols
GigE SDK and AVML and other standards available via RS232
Operating Voltage
10.5–15 VDC at camera. Unit protected for under voltage and overvoltage to 18VDC. Recommend use of low volt drop cabling for longer cable runs. MAV offer a range of made-to-length composite cables for this purpose 1-75m and PSUs.
Input voltage is conditioned by internal circuitry to ensure consistent illumination in full operational range.
Power Consumption
Nominally 30W
Physical (WxHxD)
163 x 163 x 114 mm (cylindrical) - excluding brackets/sunshield
Enclosure
IP68 hermetically sealed hard anodised aluminium in natural aluminium with rugged mount options
Weight
Camera 2.45 Kg – Camera with Sunshield and bracket 3.00 Kg
Temperature
-20°C to 50°C operating
Options and Accessories
Cable harness sets
The camera is fitted with high-grade locking connectors. Connection from the Rapier to the ANPR equipment is available through CAT5e cabling. The unit is powered by12VDC power and has I/O connectivity for triggering multiple units.
Brackets
A range of metal cradles, brackets and sunshields are available for fixed installations. Modified and bespoke metalwork can be designed and supplied to meet specific demands. Standard ranges include rapid fixing brackets/adaptors to standard CCTV
(4” / 102.5mm PCD), RAM Mount and tripod connectors in pole/wall mount configurations with tilting/panning and yaw capabilities for better alignment. The sunshields are available in a variety of construction techniques and sizes.
Pan and Tilt
MAV Systems provide pan and tilt heads, and interface units, to enable remote movement of the camera position. Pan and Tilt units have jog and preset capabilities that can be combined with presets to create integrated fixed platforms. Pan and Tilt interfaces support industry standard protocols, with enhanced features through the MAV AVML protocol.
Service
Customer Service
Friendly, helpful service for product ordering and repair returns
Technical Support
Comprehensive pre- and post-sale technical support for full life of the product
Warranty
12 month warranty, extended warranties and factory repair/replacement
Long Term Supply
Complete support for full life of the product
Training
Comprehensive product training programmes for customers
