Rapier 52 SPECIFICATION
Specification
Recognition Range and Field of View
Typically 5 to 50 metres
Range based on 850nm illumination on EU transflective plates occupying ¼ field of view
Zoom (ANPR)
37 x optical zoom, 55° to 1.59° Horizontal Field of View (fully optical) in over 1000 steps
Zoom (Overview)
12 x optical zoom, 51.54° (Wide) to 4.49° (Tele), F1.6 to F28.
IR Illumination
4 high power pulsed LED arrays (White Light, 740nm, 850nm or 940nm) with lens beam pattern options
Image
752(H) x 582(V) effective picture elements providing up to 680TVL resolution
ANPR: 0.0 Lux with IR Illumination
Overview: 0.7/0.06 Lux (Colour/B&W selectable)
Shutter
From 1/50 to 1/120,000th with Sequential Shutter control option
Filters
ANPR: IR Bandpass
Overview: Day/Night IR Cut Filter
Camera Control Protocols
AVML and other standards available via RS232
Operating Voltage
10.5–15 VDC at camera. Unit protected for under voltage and overvoltage to 18VDC. Recommend use of low volt drop cabling for longer cable runs. MAV offer a range of made-to-length composite cables for this purpose 1-75m and PSUs.
Input voltage is conditioned by internal circuitry to ensure consistent illumination in full operational range.
Power Consumption
Nominally 25W
Physical (WxHxD)
163 x 163 x 114 mm (cylindrical) – excluding brackets/sunshield
Enclosure
Enclosure
IP68 hermetically sealed
Hard anodized aluminium in natural aluminium with rugged mount options (Black anodized option available)
Weight
Camera 2.45Kg – Camera with Sunshield and bracket 3.00Kg
Temperature
-20°C to 50°C operating
Options and Accessories
Cable harness sets
The camera is fitted with high-grade locking connectors. Connection from the Rapier to the ANPR equipment is available through CAT5e cabling. The unit is powered by12VDC power and has I/O connectivity for triggering multiple units.
Brackets
A range of metal cradles, brackets and sunshields are available for fixed installations. Modified and bespoke metalwork can be designed and supplied to meet specific demands. Standard ranges include rapid fixing brackets/adaptors to standard CCTV (4”/102.5mm PCD), RAM Mount and tripod connectors in pole/wall mount configurations with tilting/panning and yaw capabilities for better alignment. The sunshields are available in a variety of construction techniques and sizes.
Pan and Tilt
MAV Systems provide pan and tilt heads, and interface units, to enable remote movement of the camera position. Pan and Tilt units have jog and preset capabilities that can be combined with presets to create integrated fixed platforms. Pan and Tilt interfaces support industry standard protocols, with enhanced features through the MAV AVML protocol.
Ethernet (IP) Encoding of Video and Camera Control
An extended version of Rapier 52 offers integrated 2 channel video encoding to MJPEG and H.264 standards. The Rapier incorporates integral Ethernet switch and serial over Ethernet capabilities. This product requires no frame grabber at the PC and can be incorporated into any structured cabling system for wide area video connectivity.
Service
Customer Service
Friendly, helpful service for product ordering and repair returns
Technical Support
Comprehensive pre- and post-sale technical support for full life of the product
Warranty
12 month warranty, extended warranties and factory repair/replacement
Long Term Supply
Complete support for full life of the product
Training
Comprehensive product training programmes for customers
